基于FPGA的FC终端协议处理芯片的设计与实现

为满足新一代航空电子系统对光纤通道网络的实际应用,实现FC终端接口板的快速开发,在对光纤通道协议进行深入研究的基础上,提出了一种基于FPGA的FC协议处理芯片的设计方案。对协议处理芯片的功能结构进行研究分析,采用模块化设计思想,对FC帧收发模块、缓冲区流量控制模块、端口状态机以及FC收发通道模块进行详细设计。通过对协议处理芯片的功能测试表明芯片满足高速低功耗的设计要求,该芯片对航空电子系统中光纤通道网络的研究与应用具有一定的借鉴与促进作用。     

****OFDM水声通信自适应调制算法研究

分析预估信道长度对信道估计算法的影响规律,提出了利用水声通信均衡恢复信号统计量对信道估计质量实时评估的方法,通过信道长度自适应修正机制,实现了对未知水声信道高精度、快速估计;针对水声信道造成的OFDM子载波特性差异,基于信道估计结果,提出了在码元总速率、能量约束条件下,各个OFDM子载波局部速率、功率优化分配的自适应调制算法,相比于传统的等功率、速率分配算法,新算法能够显著提升水声通信系统的误码率性能,通过仿真和实地试验,验证了本文研究内容的有效性。     

带限信道中准相干码相关参考波形技术多径抑制性能分析

码相关参考波形(CCRW)技术以其设计灵活、抗多径性能优异等特点成为卫星导航多径抑制研究的热点,但目前相关文献在分析CCRW技术时常假设单边信道带宽无限或远大于扩频码率,且仅研究特定参考波形的性能,缺乏具有工程指导意义的定量结论.根据CCRW技术一般原理,推导了在无限带宽时任意参考波形的鉴别曲线计算公式,给出了满足稳定跟踪的波形约束条件.分析了不同带宽和闸宽参数的W2/W4/W5三类参考波形的准相干多径误差包络性能,仿真表明带限信道中W4、W5波形抗多径性能优于W2波形;以GPS L5和Galileo E5a/E5b的QPSK(10)信号为例进行原理样机试验,结果表明W2、W5算法比窄相关技术的3dB衰减多径误差包络面积减小达63％和72％.结论可用于现代化导航接收机的多径抑制设计.     

一种三维无人机MIMO宽带信道模型

针对无人机环境特点和MIMO天线系统,建立并分析了由直射、反射和散射分量组成的基于圆筒散射三维几何传播模型,根据方位角非全向散射和俯仰角非对称分布的特点,结合无人机实际飞行参数特点,推导出简洁的闭环空时频联合相关函数,通过仿真进行了验证,分析了空时频相关特性的影响因素．     

Supplier‐buyer contracting: Asymmetric cost information and cutoff level policy for buyer participation

We consider the problem of designing a contract to maximize the supplier's profit in a one‐supplier–one‐buyer relationship for a short‐life‐cycle product. Demand for the finished product is stochastic and price‐sensitive, and only its probability distribution is known when the supply contract is written. When the supplier has complete information on the marginal cost of the buyer, we show that several simple contracts can induce the buyer to choose order quantity that attains the single firm profit maximizing solution, resulting in the maximum possible profit for the supplier. When the marginal cost of the buyer is private information, we show that it is no longer possible to achieve the single firm solution. In this case, the optimal order quantity is always smaller while the optimal sale price of the finished product is higher than the single firm solution. The supplier's profit is lowered while that of the buyer is improved. Moreover, a buyer who has a lower marginal cost will extract more profit from the supplier. Under the optimal contract, the supplier employs a cutoff level policy on the buyer's marginal cost to determine whether the buyer should be induced to sign the contract. We characterize the optimal cutoff level and show how it depends on the parameters of the problem. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 41–64, 2001     

一种短交织长度匹配交织器设计

针对无迫零比特结构Turbo码,给出了一种短交织长度匹配交织器设计准则,通过确保局部坏点对应Turbo码码重,有效减少了Turbo码字中小重量码字数量。仿真结果表明,与两种传统方法设计的交织器相比,文中算法所得交织器性能更加优良。     

一种基于MMMA的双模式变步长盲均衡算法

针对传统修正恒模算法(MCMA)收敛速度慢、剩余码间干扰大的缺点,在双模式修正恒模算法(MCMA+DD-LMS)的基础上引入局部信息量和变步长的思想,提出了一种基于修正多模算法(MMMA)的双模式变步长修正多模算法(VS-MMMA+DD-LMS)。经过理论分析和实验仿真,证明改进后的算法较传统算法具有更好的均衡效果。     

超短波信道建模方法

针对超短波信道传播条件复杂,缺乏相关成熟方法和模型的现状,对当前国内外现有超短波信道模型和建模方法进行了梳理、总结和归纳。简单介绍了超短波传播特性、信道参数以及现有模型,重点梳理了在不同应用场景下,可用于超短波信道建模的方法。然后,针对基于随机传播图理论的方法进行了重点介绍,总结了基于信道参数的模型验证方法。最后,针对不同的超短波应用条件,对相关的方法进行了展望。     

超声速转弯流道内迟滞现象的初步研究

采用特征线法,通过预先给定中心线马赫数分布,设计了消波的二维超声速转弯流道。研究了不同反压作用下转弯流道内的激波串结构、壁面沿程静压分布和壁面分离区演化等特征,分析了流道内激波串波结构与反压的关系,发现了激波串波头很难稳定在流道拐点附近。当激波串波头靠近流道拐点时,流场具有双解。流动双解区向单解区演化过程中,伴随有大分离区在上、下壁面之间的迅速转换和激波串结构的快速演化。     

Contractual agreements for coordination and vendor‐managed delivery under explicit transportation considerations

We consider the coordination problem between a vendor and a buyer operating under generalized replenishment costs that include fixed costs as well as stepwise freight costs. We study the stochastic demand, single‐period setting where the buyer must decide on the order quantity to satisfy random demand for a single item with a short product life cycle. The full order for the cycle is placed before the cycle begins and no additional orders are accepted by the vendor. Due to the nonrecurring nature of the problem, the vendor's replenishment quantity is determined by the buyer's order quantity. Consequently, by using an appropriate pricing schedule to influence the buyer's ordering behavior, there is an opportunity for the vendor to achieve substantial savings from transportation expenses, which are represented in the generalized replenishment cost function. For the problem of interest, we prove that the vendor's expected profit is not increasing in buyer's order quantity. Therefore, unlike the earlier work in the area, it is not necessarily profitable for the vendor to encourage larger order quantities. Using this nontraditional result, we demonstrate that the concept of economies of scale may or may not work by identifying the cases where the vendor can increase his/her profits either by increasing or decreasing the buyer's order quantity. We prove useful properties of the expected profit functions in the centralized and decentralized models of the problem, and we utilize these properties to develop alternative incentive schemes for win–win solutions. Our analysis allows us to quantify the value of coordination and, hence, to identify additional opportunities for the vendor to improve his/her profits by potentially turning a nonprofitable transaction into a profitable one through the use of an appropriate tariff schedule or a vendor‐managed delivery contract. We demonstrate that financial gain associated with these opportunities is truly tangible under a vendor‐managed delivery arrangement that potentially improves the centralized solution. Although we take the viewpoint of supply chain coordination and our goal is to provide insights about the effect of transportation considerations on the channel coordination objective and contractual agreements, the paper also contributes to the literature by analyzing and developing efficient approaches for solving the centralized problem with stepwise freight costs in the single‐period setting. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006